EVO Platforms

White label pricing: setup fee vs monthly fee vs revenue share

How setup fees, flat monthly fees, per-account fees and revenue share really work for brokers, what each costs as you grow, and the questions that make any quote comparable.

EVO PlatformsTrading platforms8 min read
White label pricing: setup fee vs monthly fee vs revenue share

Two quotes land on the same day. One asks for $0 upfront and a share of your revenue. The other asks for a $20,000 setup fee and $4,000 a month. The first looks cheaper. Whether it is depends on a number you do not know yet: what your brokerage earns in month twelve.

This guide explains every common white label pricing model (setup fee, flat monthly fee, per account, per deposit and revenue share), shows how each behaves as you grow, and gives you the questions that turn any quote into a number you can compare.

Key takeaways

  • White label providers charge through setup fees, flat monthly fees, per-account or per-deposit fees, revenue share, or a mix of these.
  • Setup fees hurt because of timing: they take cash before your first FTD.
  • Revenue share is cheap only while revenue is small; in our illustration, a 15% share passes a $2,500 flat fee at about $16,700 of monthly revenue.
  • Compare total year-one and three-year cost at several revenue levels, including CRM, website, feed and exit terms.
  • EVO plans start at $2,500 per month with no setup fee and no revenue share.

What are the main white label pricing models?

Most providers charge in one of five ways, or a mix of them. The difference that matters is whether your bill stays flat or grows with your success.

ModelHow you payWhat happens as you growUsually fits
Setup fee + monthly feeA one-off fee to brand and deploy, then a fixed monthly feePredictable, but cash leaves before your first depositBrokers with capital who want a fixed bill
Flat monthly fee, no setupOne fixed subscriptionStays flat; your margin grows with revenueNew and growing brokers watching cash
Per active accountA base fee for a set number of accounts, more for more accountsRises with client numbersBrokers with few, high-value clients
Per deposit or per volumeA percentage of deposits or a fee per lot tradedRises with activityBrokers expecting low volume at first
Revenue shareA percentage of your trading revenueRises fastest when you do wellFounders with almost no capital, short term

Hybrids are common: a setup fee plus a revenue share for the first months, or a monthly fee with an account cap and charges above it. Always ask which parts of a quote are fixed and which ones move.

What does a setup fee pay for?

A setup fee covers the provider's work to brand, configure and deploy your platform before launch. Published ranges run from about $5,000 to $50,000, depending on what is included.

  • Track360 lists white label setup at $5,000–$20,000 and turnkey setup at $15,000–$50,000 (as of November 2026 — check their site).
  • B2Broker puts the setup fee for a full white label package at $15,000–$50,000, with monthly platform and hosting fees of $7,000–$15,000+ (as of November 2026 — check their site).

The problem with a setup fee is timing more than size. It is paid when cash matters most: before marketing, before your first FTD (first-time depositor) and before you know your real cost per client. Illustration: $20,000 spent on setup is 80 FTDs you did not acquire at $250 per FTD.

A setup fee can be fair when it buys real custom work. Ask for a written list of what it covers. If the answer is your logo, colours and domain, many providers include that work at no charge.

How does a flat monthly fee work?

You pay one fixed subscription and the provider runs the platform. Your technology cost stays the same with 50 clients or 5,000, so every extra dollar of revenue is margin.

What to check in a flat fee:

  • What is included: platform only, or also CRM, back office, price feed and website.
  • Caps: some flat plans limit accounts, symbols or users and charge above the cap.
  • Hosting: a dedicated server for your brokerage, or a shared environment.
  • Support hours: 24/7, or office hours only.
  • Minimum term: a monthly, quarterly or yearly commitment.

An example from the market: TradeLocker publishes a broker Starter plan at $5,000 per month with 1,000 live and 2,000 demo accounts and no setup fee, and says it bills only for active accounts (as of November 2026 — check their site). It is a good fit for brokers who already run a CRM and want a modern charting front end.

How does revenue share pricing work?

Under revenue share, the provider takes a percentage of what your brokerage earns, usually from spreads and commissions or, in a B-book, from net client losses. You pay little or nothing upfront, and the provider earns more as you grow.

Revenue share often comes as part of a hybrid. Quadcode, for example, advertises a $17,500 setup price with a 35% revenue share for the first three months, then a $7,000 monthly fee (as of November 2026 — check their site). Its package includes liquidity and a dealing desk, so it can suit founders who want an all-inclusive package and can fund the setup price.

Three things to watch:

  • It grows with you. The better your month, the bigger the bill.
  • It is hard to check. You need full access to the figures the share is calculated on, and a clear definition of revenue in the contract.
  • It swings in a B-book. Your trading revenue moves month to month, and a share of gross figures can take a cut in good months without giving anything back in bad ones.

Read how brokers earn from spread, commission and swap to see which income a share would bite into, and A-Book vs B-Book vs hybrid for why B-book revenue moves the way it does.

What about per-account and per-deposit pricing?

These models tie your bill to usage: active accounts, deposits taken or volume traded. They are cheap while you are small and grow more expensive as you scale, though usually more slowly than revenue share.

  • Per active account: Leverate's entry tier, reported by Finance Magnates in February 2026, comes without charges, with paid tiers priced by the number of live trading accounts rather than revenue or volume (as of November 2026 — check their site).
  • Per deposit: B2Broker's B2CORE client portal and back office (not a trading platform) lists plans from $1,000 to $20,000 a month with free setup, each including a monthly deposit volume, plus a processing fee on deposits from 1.00% down to 0.10% depending on the plan (as of November 2026 — check their site).

When you model a usage-based quote, ask what you would pay at 500, 2,000 and 5,000 active clients, and how deposits or accounts above the included amount are billed.

Which pricing model is cheapest over a year?

A flat monthly fee with no setup is usually the cheapest once your brokerage has real revenue; revenue share is only cheapest while revenue stays very small. The illustration below shows why.

Illustration: one broker, four quotes, three possible levels of monthly net trading revenue. The setup + monthly, revenue share and per-account figures are hypothetical; the flat fee uses EVO's starting price.

Year-one costRevenue $20,000/monthRevenue $80,000/monthRevenue $200,000/month
Setup $20,000 + $4,000/month$68,000$68,000$68,000
Revenue share at 15%$36,000$144,000$360,000
$10 per active account (300 / 1,000 / 2,500 accounts)$36,000$120,000$300,000
Flat $2,500/month, no setup (EVO starting plan)$30,000$30,000$30,000

At a 15% share, the break-even point against a $2,500 flat fee is about $16,700 of monthly revenue. Above that, every month on revenue share costs more, and most founders launch planning to earn well above it.

Over three years the gap widens. Illustration: at $80,000 a month, a 15% share costs $432,000 over 36 months; the flat plan costs $90,000.

Want to put your own numbers next to a flat fee? See EVO pricing or message the team for a plan matched to your setup.

Talk to us on Telegram

What hidden costs sit outside the headline price?

Most surprises hide in what the quote leaves out. Before comparing any two numbers, check these lines:

Cost lineAsk the provider
CRM and back officeIncluded, or a separate contract? Track360 lists CRM and back office at $500–$2,000 a month for a white label tier (as of November 2026 — check their site).
WebsiteIncluded, or do you need an agency? B2Broker puts website development at $10,000–$30,000 (as of November 2026 — check their site).
Price feedIncluded, and how many symbols? Can you plug in your own?
Bridge and liquidity feesCharged separately every month?
Custom featuresCan they be built at all, and how are they quoted?
Minimum term and exitHow long is the commitment, and can you export your data if you leave?

If you already run on a provider and the bill keeps growing, our guide to switching trading platform provider covers what a move involves. Comparing against MetaTrader? See MT5 white label alternatives.

How does EVO price its white label?

EVO uses a flat monthly model: plans start at $2,500 per month, with no setup fee and no revenue share.

How EVO handles this

Every EVO plan is one subscription for the whole stack: the white-label EVO WebTrader in your colours with light and dark themes, EVO CRM with the back office, a real-time price feed with 250+ symbols (or your own feed), a full website and your own dedicated server, backed up on AWS. Support runs 24/7 through a dedicated Telegram group, and you can pay the subscription in USDT. Custom features are built on request by the same in-house team.

The trade-off is honest: a flat fee means you pay the same in a quiet month as in a busy one. For most brokers that is the point, because your margin grows with your revenue instead of your provider's. Plan details are in EVO pricing explained, and the white label solution page shows what you get. For the rest of your launch budget, read the cost to start a brokerage.

Frequently asked questions

What is a typical setup fee for a white label trading platform?

Published ranges run from about $5,000 to $50,000 (Track360 and B2Broker, as of November 2026), depending on what is included. Some providers, including EVO, charge no setup fee.

Is revenue share better than a monthly fee?

Only if your revenue stays small. In our illustration, a 15% share costs more than a $2,500 flat fee once you earn about $16,700 a month, and the gap grows every month after that.

Why do some providers charge per active account?

It lowers the entry price and ties the bill to usage. It works for small client bases, but the bill rises as you grow, so ask for the cost at 500, 2,000 and 5,000 clients.

Does EVO charge a setup fee or take a revenue share?

No. EVO plans start at $2,500 per month, with no setup fee and no revenue share, and the subscription can be paid in USDT.

What should a white label quote include?

The setup fee, monthly fee, any usage or revenue-based charges, what is included (CRM, back office, feed, website), hosting, support hours, minimum term and data export if you leave.

EVO Platforms Team

We build EVO — the white-label trading platform, CRM and back office for brokers — and have worked with brokerages since 2020.

Published: 8 min read

This article is for general information only and is not legal, tax or financial advice.

Go live in 24 hours — talk to us on Telegram

Trading platform, CRM, back office and price feed on your own server, in your brand. Plans start at $2,500 a month, with no setup fee and no revenue share.